Skip to Content
MilliporeSigma
  • Affinity Capillary Electrophoresis for Selective Control of Electrophoretic Mobility of Sialic Acid Using Lanthanide-Hexadentate Macrocyclic Polyazacarboxylate Complexes.

Affinity Capillary Electrophoresis for Selective Control of Electrophoretic Mobility of Sialic Acid Using Lanthanide-Hexadentate Macrocyclic Polyazacarboxylate Complexes.

Analytical sciences : the international journal of the Japan Society for Analytical Chemistry (2015-11-13)
Daiki Goto, Kazuki Ouchi, Masami Shibukawa, Shingo Saito
ABSTRACT

It is difficult to control the electrophoretic mobility in order to obtain high resolution among saccharides in complex samples. We report herein on a new affinity capillary electrophoresis (ACE) method for an anionic monosaccharide, N-acetylneuraminic acid (Neu5Ac), which is important in terms of pathological diagnosis, using lanthanide-hexadentate macrocyclic polyazacarboxylate complexes (Ln-NOTA) as affinity reagents. It was shown that Ln-NOTA complexes increased the anionic mobility of Neu5Ac by approximately 40% through selective complexation with Neu5Ac. The extent of change in the mobility strongly depended on the type of central metal ion of Ln-NOTA. The stability constant (K) of Lu-NOTA with Neu5Ac was determined by ACE to be log Kb = 3.62 ± 0.04, which is the highest value among artificial receptors for Neu5Ac reported so far. Using this ACE, the Neu5Ac content in a glycoprotein sample, α1-acid glycoprotein (AGP), was determined after acid hydrolysis. Complete separation between Neu5Ac and hydrolysis products was successful by controlling the mobility to determine the concentration of Neu5Ac.

MATERIALS
Product Number
Brand
Product Description

Sigma-Aldrich
Dimethyl sulfoxide solution, 50 wt. % in H2O
Sigma-Aldrich
Dimethyl sulfoxide, JIS special grade, ≥99.0%
Sigma-Aldrich
Dimethyl sulfoxide, SAJ first grade, ≥99.0%
Sigma-Aldrich
Dimethyl sulfoxide, suitable for HPLC
Sigma-Aldrich
Dimethyl sulfoxide, ≥99.5%
Sigma-Aldrich
Dimethyl sulfoxide, ≥99.0%, suitable for absorption spectrum analysis
Dysprosium, powder, 10g, max. particle size 500 micron, 99.9%
Dysprosium, rod, 50mm, diameter 6.35mm, cast, 99%
Dysprosium, foil, 25x25mm, thickness 0.1mm, as rolled, 99%
Sigma-Aldrich
Dimethyl sulfoxide, puriss. p.a., ACS reagent, ≥99.9% (GC)
Sigma-Aldrich
Dimethyl sulfoxide, ReagentPlus®, ≥99.5%
Sigma-Aldrich
Dimethyl sulfoxide, ACS reagent, ≥99.9%
Sigma-Aldrich
Dimethyl sulfoxide, puriss. p.a., dried, ≤0.02% water
Sigma-Aldrich
Dimethyl sulfoxide, Vetec, reagent grade, 99%
Lanthanum, rod, 50mm, diameter 6.35mm, cast, 99%
Dysprosium, foil, not light tested, 5x5mm, thickness 0.005mm, as rolled, 99%
Dysprosium, rod, 50mm, diameter 2.0mm, cast, 99%
Dysprosium, foil, 25x25mm, thickness 0.125mm, as rolled, 99%
Dysprosium, foil, 50x50mm, thickness 0.25mm, as rolled, 99%
Dysprosium, foil, 100x100mm, thickness 0.125mm, as rolled, 99%
Dysprosium, foil, not light tested, 50x50mm, thickness 0.025mm, as rolled, 99.9%
Dysprosium, rod, 100mm, diameter 6.35mm, cast, 99%
Dysprosium, foil, 50x50mm, thickness 0.1mm, as rolled, 99%
Dysprosium, powder, 5g, max. particle size 500 micron, 99.9%
Dysprosium, foil, 50x50mm, thickness 0.125mm, as rolled, 99%
Dysprosium, powder, 1g, max. particle size 500 micron, 99.9%
Dysprosium, foil, 25x25mm, thickness 0.25mm, as rolled, 99%
Dysprosium, foil, not light tested, 25x25mm, thickness 0.005mm, as rolled, 99%
Dysprosium, foil, not light tested, 25x25mm, thickness 0.025mm, as rolled, 99.9%
Erbium, rod, 100mm, diameter 10.0mm, cast, 99%